null

FREE SHIPPING over $99 or $8.99 Flat Fee

Raypak Digital Natural Gas 266,000 BTU Pool Heater Cupro-Nickel, 014939

Raypak Digital Natural Gas 266,000 BTU Pool Heater Cupro-Nickel, 014939

Mfg #: 014939

SKU: 014939

UPC: 637509160579

$3,427.00
No reviews yet Write a Review
Secure transaction
  • This Item Ships Free!
  • Typically Ships in 2 to 3 Business Days
  • Genuine Raypak Product
  • Raypak Preferred Partner
  • Backed by Raypak's Warranty
  • Optional Extend Shipping Protection enabled at checkout. You can opt-out, but it's recommended for coverage against loss, theft, or damage. Learn more.

Description

Raypak Digital Natural Gas 266,000 BTU Pool Heater Cupro-Nickel, 014939

Specifications

  • Elevation: 0' to 2,000'
  • Shipping Weight: 210 Lbs
  • Gas: Natural Gas (NG)
  • Model Number: P-R266A-EN-X #50
  • Part Number: 014939 (010103 Equivalent)
  • BTU: 266,000

Highlights

  • LCD digital display provides accurate temperature
  • Monitors operational status as well as service diagnostics
  • High-wind resistance
  • Corrosion-resistant headers
  • Unitherm governor prevents condensation
  • PVC plumbing directly to the heater
  • Small footprint
  • Can be installed on combustible surface
  • Cupro-nickel tubing

Features

  • 2" Intake and discharge water connections
  • PVC Plumbing directly to the heater.
  • For use in elevations of 0 to 2000 feet (be sure to verify the elevation where this heater will be installed. It will not operate properly outside of the specified elevation).
  • Microprocessor-Controlled Thermostat - The Raypak Digital gas heater is equipped with a microprocessor-based control. This control allows you to set your pool and spa temperature precisely at your preferred setting just by pressing an up or down temperature control button. The digital display tells you when the water is being heated and notifies you when your target temperature has been reached.
  • Self-Diagnostic - Troubleshooting a Raypak gas heater has never been easier. The Raypak Digital has on-board diagnostic controls that let the user and the service professional know what is going on with the heater at all times. The display uses real English, with no cryptic codes to decipher.
  • Remote-Compatible - The Raypak Digital is compatible with most major pool control and remote systems on the market today. Any two- or three-wire remote can connect to the Raypak Digital and be integrated into the pool control system of your choice. The display clearly shows the heater is under control of a remote system.
  • Run Time and Cycle Meter - Yet another industry first, the Raypak pool heater can report how long it has run and how many times it has fired. This is valuable feedback for the service professional. Multi-unit installations can monitor the run time of each unit and balance out the duty load, thus avoiding over working one individual heater.
  • Flame Strength Indicator - Raypak leads the way with the first control in the pool industry to monitor and measure the pilot flame signal. Known for our high quality, leading edge commercial boilers, it just made sense for Raypak to use this existing commercial technology on our residential pool heaters. This little tool is a service techs dream. Raypak also uses this function on the end of line test, making sure every heater leaves with a robust flame signal.
  • On Board Voltmeter - The Raypak Digital monitors the low voltage electrical supply. This helps ensure the heater is wired properly during installation. The heater will also let you know if the voltage has dropped too low to function properly. No other pool heater takes care of you like a Raypak.
  • Condensation-Free Operation - Both water temperature and flow rate inside the heater are controlled to help eliminate condensation, sooting and scale buildup that can shorten the life of a heater. Raypak engineered the Unitherm Governor specifically for pool heater applications, regulating low-temperature incoming water to help reduce condensation. The built-in automatic bypass helps prevent scaling and erosion by balancing the flow going into the heat exchanger.
  • Rust-Free Waterways - The Raypak Digital, with polymer headers, is equipped with an integral copper finned-tube heat exchanger and stainless steel tube sheets. Even the smallest details such as the studs and nuts are made out of stainless steel. The payoff? A heater that will last year after year and can easily be serviced if the need should ever arise.
  • Stainless Steel Burners - Burner design is a critical component in any gas heater. The stainless steel burner system used in the Raypak Digital is inherently forgiving and extremely robust. The burner is self-adjusting to compensate for gas pressure fluctuations, allowing the heater to always burn clean and safe.
  • Smooth Light Off - The soft-opening gas valve ensures smooth turn-on; no Hard Light to worry about. The easily removable burner tray and pilot assembly make service and maintenance a simple task.
  • Pilot Ignition - The Raypak Digital use a spark-to-pilot ignition system. This is the most reliable and robust ignition system available industry proven standard for over 30 years.
  • Cupro-nickel Fin Tube - Residential - The Raypak Digital is built to last with the highest quality integral Cupro-nickel fin tube available. Cupro-nickel exchangers stand up to the harshest of applications, like low pH, high flow or heavy use.

Raypak Preferred Partner EZ Pool & Spa Supply

"Raypak is proud to be partnered with exceptional online retailers, like EZ Pool & Spa Supply. Their staff is very knowledgeable and enthusiastic about the pool industry. As a consumer, that is what you should be looking for when purchasing the right products." -Justin Reyes, Raypak Manager, Marketing & Training, Pool

Resources