Description
BioGuard SilkGuard Complete 3" Chlorinating Tablets 12 Lbs, 52364BIO
BioGuard SilkGuard Complete Multi-Benefit 3 Inch Chlorinating Tablets are a revolutionary product exclusive to BioGuard. These chlorine tablets differ from traditional chlorine because the SilkGuard Technology actually softens the water by attaching to hard water components and metal surfaces, which protects your pool surface and equipment from scale, corrosion and staining, all while killing bacteria. SunShield Technology offers protection from the sunlight while the SmartGuard Technology helps the tablets last longer than traditional chlorine tablets. Last but not least Algae killing crystals help stop algae before it starts.
- Powerful Chlorination: BioGuard SilkGuard Complete 3” Chlorinating Tablets provide effective and long-lasting chlorination for swimming pools. Protect your pool and enjoy clean and clear water with these easy-to-use chlorine-based tabs.
- Advanced SilkGuard Technology: Our Chlorinating Tablets utilize SilkGuard Technology, to keep your pool water clean, clear, and sanitized while protecting pool equipment from corrosion.
- Next Level Sanitization: BioGuard’s SilkGuard Complete Chlorinating Sanitizer Tabs contain algae fighting crystals for improved performance helping eliminate organisms, algae, and other organic contaminants, keeping your pool clean, clear, and soft all season long.
- Compatible with All Chlorinated Pools: SilkGuard Complete 3” Tabs are great for all chlorinated pools, including saltwater and chlorine sanitizing systems. The slow-dissolving formula ensures a steady release of chlorine, maintaining optimal sanitation levels in swimming pools.
- Tested and Proven Effective: BioGuard products are known for delivering reliable results and making pool care easy. BioGuard carries an extensive line of pool solutions for all needs.
Dosage
Routine Maintenance:
16 oz per 10,000 gallons of water per week, or as needed.
Start Up:
16 oz per 10,000 gallons of water.
Directions
Before you begin:
Ensure all pool equipment is working properly. Clean or backwash filter following manufacturer's directions. Adjust pH to between 7.2-7.6. In chlorinated pools, add stabilizer to establish a minimum stabilizer level of 30-40 ppm to reduce the degradative effect of sunlight upon the chlorine residual. When using other products as outlined in the directions for this product always follow directions on those products.
Do not add other chemicals into the feeder or floater when this product is in use. as a fire or explosion may occur. To avoid damage to pool surface or materials do not allow product to come in direct contact with these materials. Do not throw tablets directly into pool.
Start-Up/Initial Treatment:
If water is cloudy or green, super chlorinate pool with appropriate shock product until pool is clear. Add 16 ounces of this product (approximately 2 tablets) per 10,000 gallons of pool water to feeder or floater. Adjust the feeder or floater following manufacturer's instructions to establish a fee available chlorine level between 1-4 ppm. Allow water to circulate at least 4 hours and then test for the free available chlorine level. When the free available chlorine level is adjusted to 1-4 ppm, add the preventative algicide appropriate to your needs.
Routine Maintenance:
Add 16 ounces of this product (approximately 2 tablets) per 10,000 gallons of pool water per week, or as often as needed, to the floater or feeder to maintain a constant free available chlorine level of 1-4 ppm. Sunlight, rainfall, temperature, number of swimmers, and frequency of pool use affects the rate of chlorine residual loss so check the floater or feeder often and refill as needed.
Re-entry into treated swimming pools is prohibited when free available chlorine levels are above 4 ppm due to rich of body injury.
